Gw-instek PPH-1503 User Manual download pdf (Page 46)

PPH-1503 User Manual

TrigLeve[3]

 Trigger Level.

 To avoid false pulse

measurements, the trigger level

can be set close to the current

amplitude. All noise and transient

currents that are below the trigger

level will be ignored. The trigger

level has a setting range of 0 to 5A,

with a resolution of 5mA. The

setting unit for the trigger level is

in amps (A). This setting is only

valid for pulse measurements.

RecallSetup

Recalls stored settings. A total of 6

settngs can be recalled:

RST/SAV0 to SAV4

Parameter

Settings

IntTime

Use the arrow keys to select IntTime,

press Enter and then use the arrow

keys to select the type of integration

time that you want to set (Hight

Time, Low Time, Aver Time). Press

Enter again to set the integration

time. After inputing the integration

time, press Enter to return to the

pulse current measurement menu. If

Auto Time was selected, press Enter to

return to the pulse current

measurement menu.

Example:

High Time 33uS: IntTime



Hight Time



using the

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 136 137

No comments

Gw-instek PPH-1503 User Manual Page 46