Gw-instek GPT-9800 series User Manual User Manual

LEAKAGE CURRENT TESTER GLC-9000 QUICK START GUIDE GWINSTEK PART NO.：82LC-90000MB1 ISO-9001 CERTIFIED MANUFACTURER

GLC-9000 Quick Start Guide 10 5. Patient Leakage Current III Refers to the current that flows through a human body that is directly connected to

INTRODUCTION 11 Measurement Modes There are a number of leakage current measurement tests covering general electrical equipment and medical electr

GLC-9000 Quick Start Guide 12 Operation  Auto/Manual/Programmable Single fault conditions and power supply polar

INTRODUCTION 13 Remote Interface There are a variety of remote control interfaces including: RS-232, USB (Host/Device), GPIB and the EXT I/O conne

GLC-9000 Quick Start Guide 14 Power and Probe Connection Mains Power 1. Ensure the power is switched off from the front panel. 2. Insert the

INTRODUCTION 15 Caution If network B (MD B) is selected an isolation transformer that outputs 110% of the rated voltage specified for the EUT is r

GLC-9000 Quick Start Guide 16 The arrow above shows the contact point for the test lead. Alligator Clips 1. Plug a test lead into the rear pane

INTRODUCTION 17 Preparation Voltage Line Selection Before power is turned on, ensure the line voltage is correct for the environment. The line

GLC-9000 Quick Start Guide 18 Power Up Press the power switch to turn on the power. The system will enter the measurement interface after a quick

INTRODUCTION 19 Interface Max : Min: Name: 10.10 mAClass: I Network: E Save RecallHard Copy NetworkClass LeakageLimit SystemAC+DCCurrentAUTOM

This manual contains proprietary information, which is protected by copyright. All rights are reserved. No part of this manual may be photocopied,

GLC-9000 Quick Start Guide 20 Judge: Shows the test result judgment. Set Limits Upper Limit: Displays the upper test limit. Lower Limit: Display

INTRODUCTION 21 Indicates that the touch panel is currently unlocked. Press the Lock key to lock the front panel. Indicates the front panel is

GLC-9000 Quick Start Guide 22 Save a screen image (BMP) Save settings. Manual measurements can be saved in real-time. Recall settings

OPERATION 23 OPERATION Measurement Terminals When a measurement network is selected, different measuring terminals are required for each test an

GLC-9000 Quick Start Guide 24 Medical Equipment MD-F CLASS I CLASS II Internal Power Type B Type F* Type B Type F* Type B Type F* Earth le

OPERATION 25 Leakage Current Testing Connections Background Confirm all settings including MD, leakage current mode, measurement time, upper and

GLC-9000 Quick Start Guide 26 The T3 terminal is high voltage. Avoid contact with the terminal. The T3 terminal should not be connected with an e

OPERATION 27 Enclosure and Line Leakage Current Non-medical type (General electrical equipment) The T2 terminal is high voltage. Avoid contact

GLC-9000 Quick Start Guide 28 Medical network (Internal power supply) Patient Leakage Current II Type B Medical Network The T3 terminal is h

OTHER 29 OTHER EUT Voltage and Current Check Background The EUT voltage and current check tests voltage, current and power consumption. Panel Ope

Table of Contents 3 Table of Contents INTRODUCTION ... 5Introduction ...

GLC-9000 Quick Start Guide 30 Voltage Measurement Background From the System menu, the meter function can measure different types of voltages: AC

OTHER 31 1. To set the safety extra low voltage, press the SELV key. 2. To set the SELV use the number pad and press Confirm. SELV Range

4

INTRODUCTION 5 INTRODUCTION This quick start guide is designed to help those who are not familiar with the GLC-9000 to quickly learn the fundament

GLC-9000 Quick Start Guide 6 Front Panel Item Description 1. POWER The power switch turns the power on or off. : ON

INTRODUCTION 7 5. Warning Indicator The warning indicator lights up when high voltages are produced from terminals T1, T2 or T3. The warning ind

GLC-9000 Quick Start Guide 8 Rear Panel ITEM Description 1. EUT AC IN EUT AC inlet. AC voltage range: 85V～ 250V AC, 50～60Hz 10A Max 2. R

INTRODUCTION 9 Leakage Current Modes 1. Earth Leakage Current Refers to the current that flows through a protective grounding wire to earth.