Gw-instek GOS-6103C User Manual download pdf (Page 4)

GOS-6103C OSCILLOSCOPE

USER MANUAL

 3 

7) Trigger signal output

The signal selected by the TRIGGER SOURCE is available. This

output may be used to connect to a frequency counter or other

instrument.

8) Panel setups lock

To avoid unintentional touch of the setting, the feature is extremely

useful for long term and repetitive measurements that used to be

performed under the same test condition of the oscilloscope setting.

9) LED indicator and buzzer alarm

The LED’s located in the front panel assist operation and indicated

additional information. Incorrect operation and the electrical end

position of control knobs are indicated by a warning beep.

10)SMD manufacturing technology

The instrument is built by using the most advanced SMD technology

so as to reduce the number of internal wiring and shorten the foil route

on the pc board. This will also greatly increase the high frequency

performance and the reliability of the product.

11)Auto Measurement

A built-in 6 digits universal counter is accurate within the range of

±0.01% and can measure frequency between 50Hz and 100MHz.

GOS-6103C OSCILLOSCOPE

USER MANUAL

 4 

2.TECHNICAL SPECIFICATIONS

Sensitivity 2mV~5V/DIV,11 steps

in 1-2-5 sequence

Sensitivity Accuracy

±3% (5 DIV at the center display )

Vernier Vertical Sensitivity

Continuously variable to 1/2.5 or less than

panel-indicated value

Frequency Bandwidth(-3dB) DC ~ 100MHz (2mV/DIV:DC ~ 20MHz)

Rise Time 3.5ns (2mV/DIV:17.5ns)

Signal Delay Leading edge can be monitored

Maximum Input Voltage 400V (DC+AC) at 1kHz or less

Input Coupling AC, DC, GND

Input Impedance

1MΩ±2% // 25pF approx.

Vertical Modes

CH1,CH2,DUAL(CHOP/ALT),ADD(DIFF mode can

be established when the CH2 is in the INV mode)

CHOP Repetition Frequency Approx. 250kHz.

Polarity (INV) CH2 only

Bandwidth Limited 20MHz

VERTICAL

DEFLECTION

SYSTEM

Common-mode

Rejection Ration

50:1 or better at 50kHz

Trigger Modes AUTO, NORM, TV

Trigger Source CH1, CH2, LINE, EXT

Trigger Coupling AC, DC, HFR, LFR

Trigger Slope +/- polarity or TV sync polarity

Mode Frequency INT EXT

10Hz~20MHz 0.35DIV 50mVpp

AUTO

20MHz~100MHz 1.5DIV 150mVpp

DC~20MHz 0.35DIV 50mVpp NORM

20MHz~100MHz 1.5DIV 150mVpp

Trigger Sensitivity

TV Sync signal 1DIV 200mVpp

Trigger Level Range

INT : ± 4 DIV or more

EXT : ± 0.4 V or more

TV Sync TV-V,TV-H

Max. External Input Voltage 400V (DC + AC peak) at 1kHz

TRIGGER

SYSTEM

External Input Impedance

1MΩ± 5% ／／ 25pF approx.

1 2 3 4 5 6 7 8 9 ... 29 30

Comments to this Manuals

No comments

Gw-instek GOS-6103C User Manual Page 4

Comments to this Manuals

Related products and manuals for Equipment Gw-instek GOS-6103C