Gw-instek GDS-1000A-U Series firmware upgrade guide User Manual

Browse online or download User Manual for Equipment Gw-instek GDS-1000A-U Series firmware upgrade guide. GW Instek GDS-1000A-U Series firmware upgrade guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
How to Upgrade the Firmware
1
How to Upgrade the
Firmware
This application note describes how to manually upgrade the GDS-
1000-U/GDS-1000A-U’s firmware.
Required equipments
USB flash drive
A standard USB flash drive with the below
firmware files copied into the root directory
Firmware
Three files are required:
dso1kh.rom
dso1ks.rom
dso1kmon.rom
Front panel overview with items related to the upgrade
GDS-1000-U/GDS-1000A-U Application Note
2
Procedure
1. Inserting the
USB flash
drive into the
USB host port
Insert the USB flash drive including new firmware
files into the GDS-1000-U/GDS-1000A-U’s USB
host port.
2. Turning the
oscilloscope
on
Power the oscilloscope up and at the same time,
press the F1 key several times. The oscilloscope
should automatically boot in the firmware
upgrade mode as in the snapshot below.
3. Upgrading the
firmware
Press the F4 key. The oscilloscope automatically
starts upgrading the firmware.
When the status indicator at the bottom of the
display shows the “Upgrade Success!!” message,
upgrading the firmware is completed.
(ongoing)
(completed)
4. Confirming the
upgrade
Power the oscilloscope off and on to reboot the
system. Open the system information by pressing
the Utility key System Info (F4).
Utility
System
Info.
Check the firmware version in the system
information screen that it is being updated.
Updating the firmware is completed
Page view 0
1

Summary of Contents

Page 1 - Firmware

How to Upgrade the Firmware 1 How to Upgrade the Firmware This application note describes how to manually upgrade the GDS-1000-U/GDS-1000A-U’s fir

Comments to this Manuals

No comments