Gw-instek PSU-Series Programming User Manual User Manual download pdf (Page 84)

PSU Programming Manual

[:SOURce]:VOLTage[0]:LIMit:AUTO

Set

Query

Description

Sets whether to limit the voltage setting so that it

does not exceed the OVP setting or become lower

than the UVP setting.

If you enable the limit when the OVP setting is

lower than the voltage setting, the OVP setting will

be set to 105 % of the voltage setting.

If you enable the limit when the UVP setting is

higher than the voltage setting, the UVP setting

will be set equal to the voltage setting.

Syntax

[:SOURce]:VOLTage[0]:LIMit:AUTO {<bool>|OFF|ON}

Query Syntax

[:SOURce]:VOLTage[0]:LIMit:AUTO?

Parameter

OFF | 0

Disable the limit setting

ON | 1

Enable the limit setting

Return parameter

<bool>

Returns the setting in <bool> format.

Example

SOUR:VOLT:LIM:AUTO 0

Disables the limit setting.

[:SOURce]:VOLTage[0]:LIMit:LOW

Set

Query

Description

Sets or queries the under voltage (UVL) trip point.

Syntax

[:SOURce]:VOLTage[0]:LIMit:LOW

<NR2>(V)|MINimum|MAXimum

Query Syntax

[:SOURce]:VOLTage[0]:LIMit:LOW?

Parameter/Return

<NR2>

0 ~ the present setting voltage

MIN

Minimum allowed voltage level

MAX

Maximum allowed voltage level

Example

SOUR:VOLT:LIM:LOW MAX

Sets the UV> level to its maximum.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 127 128

Comments to this Manuals

No comments

Gw-instek PSU-Series Programming User Manual User Manual Page 84

Comments to this Manuals

Related products and manuals for Equipment Gw-instek PSU-Series Programming User Manual